Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
Subdivision information and contact information can be found here.
Show All Answers
One you have determined your properties zoning, you will go to Sec. 27-300. The setback requirements are listed in the table for your specific zoning.
Once you have established your property zone, you will go to Sec. 27-300 to determine placement and setback requirements for attached and detached garages. In Sec. 27-1008 (D) you will find Detached Accessory Residential Structures. Detached buildings for accessory uses greater than 200 square feet in size shall not exceed the principal building first story gross floor area on the lot or 1,500 square feet, whichever is less.
Once you have established your Zoning, go to Sec. 27-300 and look up your specific zone. The table lists the lot coverage available. You will times the lot size by the available lot percentage. (ex. 7000 sq ft lot times 60% = 4200 lot coverage available).
Home occupations are allowed in Residential areas with a City of Billings business license. Restrictions on home occupations Sec. 27-1000 (M) can be found here.
Each Zoning District has a list of Permitted, Permitted Limited, Permitted use Restrictions and Permitted through Special Review. The specific zoning district use table can be found in Table 27-1000.1 Billings Primary Use Table
Yes, fence permits that are between the height of 4 feet and six feet are required under the Unified Zoning Code. The permit can be found here.